For alarms, we have available 2 (two) additional options:
1/ The connectivity to a BMS (Building Management System) or similar to suit your installation.
2/ The use a cell modem that is connected to the control box, can be configured 2 following ways.
- Call to Action- Modem will dial designated number if any fault (Power, No flow, Leakage or water this is dependant on sensors fitted.) Any one of these will dial the designated phone number (Up to 5 numbers can be stored) and deliver pre coded message.
- Message separation, each sensor is separately connected allowing a different message for each fault type. With this the system will send a message different numbers for different faults.
In addition if the alarm allows, you can reset units from your cell phone.
Also the current status of the machines operation can be monitored, letting you know remotely if the machine is running as you can poll it from your phone.
This addition allows for the dialling of up to 5 numbers.
Description
Digital input 3G 4G GSM alarm module with 2 output relay for home automation and M2M, USB programmable, 2G 3G 4G gsm
Sms alarm module Automatic controller are special for remote switch on/off machine, equipment, and also it supports digital inputs for different detectors as water level detectors, PIR motion detectors, etc.
One of the advantages of them is when the inputs can be recovery alert by SMS, and with an interlock relay output, an SMS Command switch on/off relay output.
As alarm notification, send definition SMS and dial the user mobile phones.
Features
1. Support 2 relay outputs, 7A @ 220VAC,5A @ 220VAC, 20A @ 14VDC;
2. Alarm-Link Output Relay can switch at 0-120 minutes when controller unit activated;
3. 8 Alarm logic digital inputs, NC or NO and EOL is optional;
4. Compatible with the Wet Contact , Reverse protection, to avoid the wrong connection damage;
5. 1 siren output, can connect the siren directly, once alarm occurred, the siren will sound;
6. 3 SMS Alert numbers and 5 Alarm dial phone numbers can accept to receive the alarm message;
7. Supports armed, disarmed, inquiry status, or disable Independent Output Relay by SMS commands;
8. Password protected, prevents unauthorized user;
9. Can be set and programmed from PC Configurator by USB cable;
10. Built-in rechargeable battery, power lost/recover alarm, low maintenance, 24×7 operation;
11. Support Android/IOS APP, easy & friendly for use/configuration.
12. Support USB configure parameters, load profiles, and upgrade the firmware via PC;
13. Wall mount or 35mm standard DIN rail Design, ease of installation.